Table of Contents
Advertisement
2.6 AC5200 (ACC-Lite)
2.6.1 Restoring Default Network, Password and PIN Settings
A6V11164550
Refer to AC5200 Quick Start Manual for details.
Firmware downloads are done from the SiPass integrated software. This process is
the same as downloading firmware for an ACC.
Before you begin:
The AC5200 must be created in the SiPass integrated database and be com-
municating
To download firmware to the AC5200:
1. Select System > Initialize.
2. Double click your AC5200 from the list of available units.
3. Click Image Download.
4. Click Browse to select the firmware image to download.
5. Click Download. The selected firmware will be downloaded and the AC5200
will reset once it has been upgraded.
6. Click Close to close the Initialize System dialog.
Accessing Menu via Keypad
●
PIN access to the LCD Menu for ACC-Lite firmware is available SiPass
integrated MP2.7 onward. The default PIN is '1111'.
●
If you upgrade from an earlier version of ACC-Lite to the SiPass integrated
MP2.7, opening the keyboard and logging in for the first time with the default
PIN will require setting a new PIN for security purpose.
●
The PIN must be secure with length from 4-10 digits. Save this new PIN in a
secure place after setting.
●
If you change the ACC-Lite PIN but forget, there is an ACC telnet Console
command to change the PIN.
●
If both PIN and telnet passwords are lost then it must be returned to factory or
Siemens.
●
If you changed the PIN using SiPass integrated MP2.7, install an earlier
version of the ACC-Lite firmware, then again re-install MP2.7, you must logon
with the PIN that was previously set (because the PIN has already been
changed using the MP2.7 build, setting a new PIN is not required again).
To recover the PIN: Telnet to the ACC-Lite and use the pin **** console
command to change the PIN.
To recover the Password:
1. Downgrade to a MP 2.65 build.
2. Use the set defaults command from the Telnet console. (The default IP
address is now: 192.168.1.250)
3. Reset the network settings.
4. Reset the ACC.
5. Upgrade back to MP2.70
6. Login via telnet. Default login credentials are: SIEMENS/spirit
7. Change the password when asked.
Access Controllers
2
AC5200 (ACC-Lite)
31 | 38
Advertisement
Table of Contents
