GE LOGIQ E9 Service Manual page 154

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5573152-100, R

Top Console block diagram - R5.x and later*

* On console model 5205000-9 (R6.x) a 23 inch Widescreen Ultrasound LCD Monitor which requires a

new Bulkhead Board. To easily identify and understand the differences, see:

inch LCD Monitor Block diagram - R6.x and later" on page

Figure 5-7 Top Console block diagram - R5.x and later

48V POWER/AUDIO

USB for OP PANEL

USB for VIDEO on TOUCH PANEL

UP/DN/BRAKE/RELEASE SWITCHES

Input Signals

On/Off Switch and LED

DVI Video for the Main Monitor

+48 VDC power for the electronics

Audio (Stereo) for the speakers

USB line dedicated to the Touchscreen Video

Bidirectional Signals

USB for Op Panel uses a USB HUB with 7 outlets:

Fuses, Jumpers, DIP-switches and LEDs

Refer to Chapter 8. No Dip Switches on the Trackball.

1 USB connector on the Bulk Head (goes to main monitor)

2 x USB connectors on the Operator Panel

USB for the Trackball

USB for the Alphanumeric Key Board

USB for the Switch Board Rotary Devices and the touch "keys" on the Touch Screen

Section 5-3 - Top Console with LCD monitor and Operator Panel

Figure 5-2 "LOGIQ E9 23

BUTTONS, LIGHTS

ROTARIES, SLIDES

MEMORY STICK