Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual page 5

Naming conventions
This document uses the following naming conventions.
Term
Plant
Comfort HMI device,
HMI device,
Device
WinCC
Instead of the full product name, the short product name is also used without the suffix
"Unified Comfort", for example:
"MTP700" representative for "MTP700 Unified Comfort"
Figures
This manual contains figures of the described devices. The figures can deviate from the
delivered device in detail.
Picture components are marked with black position numbers on a white background:
①
,
Steps in the figures are identified with white process numbers on a black background
according to the sequence in which they have to be executed:
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
Applies to
•
•
•
•
•
•
•
•
•
SIMATIC WinCC Unified V16 or higher
② ③
, , ...
System
Machining center
One or more machines
MTP700 Unified Comfort
MTP1000 Unified Comfort
MTP1200 Unified Comfort
MTP1500 Unified Comfort
MTP1900 Unified Comfort
MTP2200 Unified Comfort
Preface
, , , ...
5