Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual page 110

Operating the Control Panel
5.9 Service and Commissioning
2. Press "OK".
The window "Service and Commissioning" > "Automatic Backup" opens in the Control
Panel.
"Ready for automatic backup" is displayed in the "Status" field.
3. Press the "Start" button.
The "Start automatic backup" dialog box is displayed.
4. Press "OK".
The status message "Starting automatic backup" is displayed. The system memory card
is being prepared.
Note
Do not remove the system memory card during the preparation.
If you remove the system memory card from the HMI device during the preparation, the
system memory card cannot be used for automatic backup. Leave the system memory
card in its slot during the preparation process.
The status message "Synchronizing data" is displayed during the preparation.
When the preparation is complete, the status message "Automatic backup active" is
displayed.
You have successfully activated the "Automatic backup" function.
110
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA