Toro 30284 Service Manual page 133

LINKAGE
15. Position the idler/brake rod assembly onto the
machine so the torsion spring is hooked onto the
frame. (Fig. 0389).
4
16. Align the idler pivot with the mounting hole on the
frame and insert the idler pivot bolt (Fig. 0390).
4-26
Fig 0389 PICT-1783
Fig 0390 PICT-1759
17. Install a nut onto the idler pivot bolt (Fig. 0391).
Fig 0391
18. Insert the lower end of the brake rod into the brake
arm assembly (Fig. 0392).
Fig 0392
Floating Deck Mid-Size Service Manual
PICT-1758
PICT-1757