Table of Contents
Advertisement
ISOFIX lower anchor-
ages attachment
Top tether anchorage
attachment
Child restraint system fixed
with a seat belt
■
Installing child restraint sys-
tem using a seat belt
Install the child restraint system in
accordance to the operation man-
ual enclosed with the child restraint
system.
If the child restraint system on hand
is not within the "universal" cate-
gory (or the necessary information
is not in the table), refer to the
"Vehicle List" provided by the child
restraint system maker for various
possible installation positions, or
check the compatibility after asking
the retailer of the child seat.
(P.42, 43)
HIGHLANDER HV_GE
HIGHLANDER HYBRID_OM_General_OM48K22E
Installation method
1
If installing the child restraint
system to the front passenger
seat is unavoidable, refer to
P.39for the front passenger seat
adjustment.
2
Adjust the seatback angle to the
most upright position.
When installing a forward-facing child
seat, if there is a gap between the child
seat and the seatback, adjust the
seatback angle until good contact is
achieved.
3
If the head restraint interferes
with your child restraint system,
and the head restraint can be
removed, remove the head
restraint. Otherwise, put the
head restraint in the upper most
position. (P.133)
1-2. Child safety
Page
P.49
P.50
47
1
Advertisement
Table of Contents
