Resuming Follow-Up Cruising When Vehicle Is Stopped By System Control; Canceling And Resuming The Speed Control; Approach Warning (Vehicle-To-Vehicle Distance Control Mode) - Toyota Highlander Hybryd Owner's Manual

224
4-5. Using the driving support systems
Distance
options
Long
Medium
Short
Resuming follow-up cruis-
ing when the vehicle has
been stopped by system
control (vehicle-to-vehicle
distance control mode)
After the vehicle ahead of you
starts off, press the "+RES" switch.
Your vehicle will also resume fol-
low-up cruising if the accelerator
pedal is depressed after the vehicle
ahead of you starts off.
HIGHLANDER HV_GE
HIGHLANDER HYBRID_OM_General_OM48K22E
Vehicle-to-vehicle dis-
tance
Approximately 50 m (160
ft.)
Approximately 40 m (130
ft.)
Approximately 30 m (100
ft.)
Canceling and resuming the
speed control
1
Pressing the cancel switch can-
cels the speed control.
The speed control is also canceled
when the brake pedal is depressed.
(When the vehicle has been stopped by
system control, depressing the brake
pedal does not cancel the setting.)
2
Pressing the "+RES" switch
resumes the cruise control and
returns vehicle speed to the set
speed.
Approach warning (vehi-
cle-to-vehicle distance con-
trol mode)
When your vehicle is too close to a
vehicle ahead, and sufficient auto-
matic deceleration via the cruise
control is not possible, the display
will flash and the buzzer will sound
to alert the driver. An example of
this would be if another driver cuts
in front of you while you are follow-
ing a vehicle. Depress the brake
pedal to ensure an appropriate
vehicle-to-vehicle distance.