Displaying Sge/Sga And Spl Signals - Siemens SINUMERIK 840D sl Commissioning Manual

16.8.2

Displaying SGE/SGA and SPL signals

Safety-related inputs and outputs
SGE
Safe input signals, NCK, Bit 0...15
Safe input signals, drive, Bit 0...15
Safe input signals, NCK, Bit 16...31
Safe input signals, drive, Bit 16...31
SGA
Safe output signals, NCK, Bit 0...15
Safe output signals, drive, Bit 0...15
Safe output signals, NCK, Bit 16...31
Safe output signals, drive, Bit 16...31
Safe programmable logic
Variables
$A_INSE (P)
$A_OUTSE (P)
$A_INSI (P)
$A_OUTSI (P)
$A_MARKERSI (P)
$A_PLCSIIN
$A_PLCSIOUT
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
The "Safety Integrated Status" window appears.
... 3. Press the "Axis +" or "Axis -" softkey.
The values of the next or the previous axes are displayed.
- OR -
Press the "Axis selection" softkey and select the desired axis directly
from the displayed list of available axes.
$A_INSE (P) - corresponds to simultaneous selection of:
$A_INSE (upper line, origin of the NCK) and
$A_INSEP (lower line, origin of the PLC)
comp. $A_INSE (P)
comp. $A_INSE (P)
comp. $A_INSE (P)
comp. $A_INSE (P)
comp. $A_INSE (P)
comp. $A_INSE (P)
Service and diagnostics
16.8 Safety Integrated diagnostics
187