Hot Line-Ccis - NEC UNIVERGE SV9300 Networking Manual

HOT LINE-CCIS

General Description
This feature allows two stations, at different nodes in the CCIS network, to be mutually associated on an
automatic ring down basis through the CCIS network.
Programming
To use the Hot Line-Outside feature:
START
CM12 Assign a Hot Line to the required stations.
CM71 Allocate memory area Hot Line-Outside calls.
For example, to assign 10 Hot Line-Outside
calls into No. 100 through No. 109 Memory
Slots, 2nd data is "100010". Abbreviated
Codes are automatically assigned as shown be-
low:
Memory Slot 100
Memory Slot 109
CM72 Assign the Called Party number to each
Memory Slot number for Hotline.
CM52 Define the Hot Line pairs.
A
DESCRIPTION
Abbrev. Codes
00
09
• Y=03
(1) X-XXXXXXXX: Station No.
(2) 04: Hot Line
(1) 65: For Hot Line-Outside
(2) XXX ZZZ
XXX: 000-299: Stating Memory Slot No.
ZZZ : 001-300: Number of Slots to be as-
• Y=0
(1) 000-299: Memory Slot No.
(2) XXXX
XXXX : Access Code (Maximum 4 digits)
,
: Separator Mark
YY...Y : Called Party No.
• Y=00-99 Hot Line Pair No.
(1) 0: Calling Side
1: Called Side
(2) C XX for Called Side party
XX: 00-09: Abbreviated Code exclusively
1-177
Chapter 1 CCIS FEATURES
HOT LINE-CCIS
DATA
in Block
signed in Block
,
YY...Y
(Maximum 26 digits)
for Hotline-Outside call
assigned by CM71>65
NWA-088654-001 Rev.1.0
94ch1005.fm