Call Charge Value By Extension; Call Cost Limit For An Extension - Siemens HiPath 1100 Series Programming Manual

General Programming
Step by Step
*
84
Press this key.
#
Initial state for Programming Mode.

Call Charge Value by Extension

This setting specifies the monthly amount that each
extension can spend.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
9 7
Enter the extension number (e.g., 11/101).
Enter the maximum amount that can be spend by the
extension (up to 5 digits)
... Enter the decimal separator position (0 to 4)
0 4
For example, for $ 0.12: 00012 and 2
For example, for $ 1.00: 00001 and 0 (default).
Initial state for Programming Mode.

Call Cost Limit for an Extension

This setting limits how much an extension has available
for Call Charges.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 4 4
Enter the extension number (e.g., 11/101).
or Activate/Deactivate Call Charge limit:
#
* = To activate
= To deactivate (default)
#
Initial state for Programming Mode.