Faults - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.4 "Information" menu
The table has the following columns:
● Restart
Counts the number of restarts since you last reset to factory settings and shows the device
restart after which the corresponding event occurred.
● System Up Time
Shows the time the device has been running since the last restart when the described event
occurred.
● System Time
Shows the date and time when the described event occurred. If no system time is set, the
box displays "Date/time not set".
● Severity
Sorts the entry into the categories above.
● Log Message
Displays a brief description of the event that has occurred.
4.4.6

Faults

Error status
if an error occurs, it is shown on this page. On the device, errors are indicated by red fault LED
lighting up.
Internal errors of the device and errors that you configure on the following pages are indicated:
● "System > Events"
● "System" > Fault Monitoring"
The calculation of the time of an error always begins after the last system start. If there are no
errors present, the fault LED switches off.
92
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08