Siemens SINUMERIK 840D sl Programming Manual page 275

G18: L1 in Y axis (no turning machine application)
G19: L1 in X axis (corresponds to radial position)
Conditions
Length L1 is determined if the following conditions are satisfied:
● the active tool is of type 2xy (drill)
● Channel-specific SD 42950: $SC_TOOL_LENGTH_TYPE=0
● G17 or G19 are active and
Measure drill length L1 for G17
Procedure
The part program or ShopTurn program to be processed has been created and you are in the
editor.
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
1. Press the "Meas. tool" softkey.
2. Press the "Drill" softkey.
The input window "Measure: Drill" opens.
3.5 Measure tool (turning)
Measure drill length L1 for G19
Measuring variants
275