Model Lwa435 Input Module (±5 Vdc Voltage Input, 4 Channels) - Hitachi HSC-2100 Hardware Manual

2.29 Model LWA435 Input Module (±5 VDC Voltage Input, 4 Channels)
Item
Module input
Input channels
Insulation method
Rated input voltage
Input voltage range
A/D bits
Conversion ratio
Overall accuracy
(room temperature)
Overall accuracy (0 to 55°C)
Response time
Input filter
Input impedance
Internal
12 VDC
consumption
5 VDC
current
Insulation withstand voltage
Connection
Applicable
cable size
External wiring
Tightening
torque
Maximum
wiring length
Mass
Process side
Channel 0
Channel 1
Channel 2
Channel 3
The overall accuracy listed above is expressed as percentages of the full scale value of
this AI module.
The response time listed above does not include the delay time of the input filter.
The cable connected to each channel is one that is shielded either separately from or
together with the cables connected to the other channels.
This AI module can only be used in conjunction with a model LQP510 LPU, Module
Rev. R, or a model LQP710 LPU, Module Rev. N, and with a model LWS410 or
LWS010 E.STATION.
If it is selected for use with any other LPU or CPU and any other E.STATION, the
module will not function.
The module supports only the above-mentioned combinations.
This AI module can only be used with the station's number-of-points setting set to 16.
If it is set to any other value (32 to 128), the module will not function.
The module supports only the value 16.
AI data is updated by support program for this AI module only when all of the four
channels are active.
This AI module can be used with the S10V Ladder Chart System as long as the Ver-Rev
of the latter is 01-21 or later.
If this AI module is selected for use with any other Ver-Rev of the software product, the
user can secure no data storage area for AI data.
2 SPECIFICATIONS OF INDIVIDUAL MODULES
Specification
Voltage input
4
Semiconductor-insulated flying-capacitor (each channel insulated
separately by controlling photo-MOS switches)
0 to ±5 VDC
±6 V
14 (sign bit + 13 bits)
8,000 in digital value to 5 V
±0.3% full scale (ambient temperature from 20 to 25°C)
±0.4% full scale
45 + 5TRc ms or less (TRc: remote I/O transfer time)
Time constant, 0.15 s
1 MΩ or more
350 mA or less
50 mA or less
500 VDC, 1 minute (between external terminal and ground);
500 VDC, 1 minute (between channels)
20-point terminal block connector (Connector screw type: M3)
2
0.5 to 1.25 mm
0.6 to 0.8 N·m
200 m (shielded twisted-pair cable)
360 g
LWA435
+ S0
- C0
SHD
+ S1
- C1
SHD
+
S2
-
C2
SHD
+ S3
-
C3
SHD
SHD
2-33
Internal circuitry
A/D
LWA435 AI
A.INPUT
DC±5V
1
S0
2
C0
3
SHD
4
5
S1
6
C1
7
SHD
8
9
S2
10
C2
11
SHD
12
13
S3
14
C3
15
SHD
16
17
GND
18
19
20
HITACHI