Sending The Ladder Program - Hitachi HSC-2100 Hardware Manual

5 MAKING USE OF MODULES

5.5.4 Sending the ladder program

To send the converted ladder program to the S10mini controller, perform the following
procedure:
① As shown below, connect the following computers together by cable: the S10mini CPU
mounted in an HSC-2100 expansion unit and the personal computer.
② Start the ladder chart system on the personal computer.
Then, if a necessary connection setting is already made, proceed to Step ④.
Otherwise, choose [Change connection of PCs(N)] from the [Utility(U)] pulldown menu.
S10mini
Personal computer
Model S10m-IFH3-W cable
or commercially available
RS-232C cross cable
Choose [Change connection of PCs(N)] from
[Utility(U)] pulldown menu.
5-46