Serial Defaults - Philips Hadco ZoneScape 1-A Documentation

ZoneScape 1-A module documentation
.

Serial Defaults

* Every unit has a default serial settings for communication between the onboard
microcontroller and the WiFi module. These settings by default are:
 57600,8,n,1
There are cases where after factory reset the serial settings are reset to 115200,8,n,1
and this can be seen on the module WEB configuration page @ 192.168.16.254 .
If the user encounters a 115200,8,n,1 setting after a factory reset, these values need
to be set to : 57600,8,n,1 in the module's web configuration page, as shown on the
screenshot below:
Proposal Page 5 of 28