Menu Items - Sony FVS-1000 Series Operation Manual

Menu Operations

Menu Items

HOME menu
Item Contents
SETUP For setting the FVS-1000 system
COLOR For adjusting the color
PAN For adjusting the angle of the camera
AUDIO For adjusting the audio
FUNCTION For activating various functions
DIAG For checking the system status
TEST For testing the system
SETUP menu
Item
FILM TYPE
Size
Perf (film perforation size)
CoreS
(core size of the supply side)
CoreT
(core size of the take-up side)
Char (characteristics)
FILM RATE
REFERENCE
Ref (reference)
SIGNAL PATH
SD1, SD2
26
Setting(s)
Select the film size.
35 mm: 35 mm film
16 mm: 16 mm film
Select the film perforation size from among 4P, 3P, 2P, 8P,
and SLIDE.
Select the core size of the supply and take-up sides.
2-inch: for 2-inch core
3-inch: for 3-inch core
5-inch: for 5-inch core
Select the film color characteristics.
NEGA: Negative film
PT: PrimeTime
I-NEGA: Inter negative
IP: Inter positive
PRINT: Print
Select the film rate from among 24, 25, and 30. For each film
rate, select 1.000 or 1/1.001.
Select a reference signal from among INTERNAL, 1125 30
(EXT), 1125 24 (EXT), 1125 25 (EXT), 525 (EXT) or 625 50
(EXT).
Select a signal path to an SD1 or SD2 board.
MAIN–SD1/2 NRM: Normal path
a a
MAIN–HDIE–SD1/2 : The signal passed the HD image
a a
enhancer circuit is input to the SD1 or SD2 board.
HD1 – HD1IN–SD1/2 : The output signal of the HD board
a a a a a a
passes through an external device and is input to the HD1IN
then output from the SD1/SD2 board.
HD1–SD1/2 : The output signal of the HD board passes
a a
through an internal path and is input to the HD1IN, then output
from the SD1/SD2 board.
Mode Operation
No. No.
F0 1
F1
F2
1
F3 1