Store Name/Address Setting - Toshiba SL-5300 Series Owner's Manual

14. PROGRAMMING MODE
14.9

Store Name/Address Setting

You can set the store name and address with this menu.
The following screen will appear when the [Store name/Address] key of the Programming Mode Main
Menu is touched.
Address No. area
ADD key
SEARCH CODE key
SORT key
Key Functions
Key
SORT Used to defragment the data in the flash ROM.
Since this machine uses the flash ROM, repeated data input may disable the data entry
in spite of sufficient memory capacity. ("Memory not enough error" will appear.)
When the [SORT] key is touched, the confirmation screen will appear. To execute,
touch the [GO] key, or [CANCEL] key to cancel.
It takes a while to complete the data sort.
SEARCH CODE Used to search the desired address No. and display it on top of the list.
ADD Used to add a new store name/address.
COPY Used to copy the data to other address No.
DELETE Used to delete the desired address No.
CHANGE CODE Used to change the address No.
Procedure
Item
Adding a new store
name/address
Selecting the store
name and editing the
store name
Selecting the address
and editing the address
Searching an address
No.
Copying the store
name/address
Deleting the store
name/address
Changing the address
No.
NOTE: When the already existing address No. is input for the copy or No. change operation, a beep tone
sounds and an error message is displayed. Overwrite ([GO] key) or cancel ([Cancel] key) the
operation.
1. Input a new address No. (1 – 50)
2. Touch the [ADD] key.
1. Touch the store name area.
2. Touch the same store name area again to edit the store name (Max. 32
characters x 1 line).
1. Touch the address area.
2. Touch the same address area again to edit the address (Max. 32 characters x
2 lines).
1. Input an address No. you desire to search.
2. Touch the [SEARCH CODE] key.
1. Touch the address No. area of copy source.
2. Input the address No. of copy destination.
3. Touch the [COPY] key.
1. Touch the address No. area to be deleted.
2. Input the address No.
3. Touch the [DELETE] key.
1. Touch the address No. area you desire to change.
2. Input a new address No.
3. Touch the [CHANGE CODE] key.
Function
Procedure
14-30
EO1-31009
14.9 Store Name/Address Setting
Store Name area
Address area
COPY key
DELETE key
CHANGE CODE key