Error Message Table - Toshiba SL-5300 Series Owner's Manual

24. ERROR MESSAGE TABLE

24. ERROR MESSAGE TABLE
Take the following action if an error message appears on the commodity name display along with the
buzzer sounding.
If you cannot solve the problem with the following solution instruction, do not attempt further
troubleshooting by yourself. Turn the power off, unplug the scale, then contact authorized
TOSHIBA TEC Service representative for assistance.
Do not attempt to repair or adjust alone because electrical equipment is dangerous.
Error Message
Programmed data is
incorrect.
No PLU is
programmed.
MC has not performed
format yet.
No MC is inserted.
Data is over the
capacity of MC.
No File is found in
MC.
Data is over the File
capacity.
Price is over the
limitation.
Price 0 is not allowed.
There is no space to
be printed.
Appointed range is
incorrect.
Paper end is detected
now. Please set new
Paper.
Cause
The programmed data of selected item is
incorrect.
No PLU is programmed.
Memory card (ATA or CF) has not been
formatted yet.
Scale cannot detect the memory card
(ATA or CF).
Memory card capacity doesn't satisfy the
size of data to be saved.
Scale cannot detect the selected files on
the memory card (ATA or CF).
File capacity filled up with the
programmed data.
The Number of digit of the price exceeds
the limit.
By the initial setting, label printing cannot
be performed when price is 0 in
Registration mode.
Data of PLU, Commodity, Grade Line,
Unit Price, Weight, and Price cannot be
printed.
The selected start PLU# is over the
selected end PLU#.
The label ended.
WARNING!
Correct the programmed data.
Program a correct PLU.
Format the memory card (ATA or CF).
Re-insert the memory card (ATA or CF).
Delete part of the files from the
memory card. And reduce the files to
be saved in the memory card.
Prepare another memory card.
Store data into the memory card.
Change the allocated Number.
Sort the files by the [SORT] key
Delete unnecessary files.
Re-program the unit price and the
weight.
Retry the operation so that the price is
not 0.
Ask your authorized TOSHIBA TEC
representative to change the initial
setting.
Re-program the name so that the
Number of characters is within the
maximum.
Re-program the sub name so that the
Total Number of characters of the
name and the sub name is within the
maximum.
Re-program the start PLU# and the end
PLU#.
Set a new label.
24- 1
EO1-31009
24. ERROR MESSAGE TABLE
Solution