Saving And Restoring Data - Siemens Sinamics G120P Instruction Manual

Saving and restoring data

Saving data in different location is important. The EXTRAS function allows loading parameter data from
the converter memory to the BOP-2 and vice versa.
Saving parameter sets from the converter to the BOP-2
• Navigate with the menu bar to the function EXTRAS
• Press OK
• Push the DOWN button until TO BOP appears
• Press OK
Copying parameter sets from the BOP-2 to the converter
• Navigate to the menu EXTRAS
• Press OK
• Push the DOWN button until FROM BOP appears
• Press OK
• Disconnect from the line supply and reconnect, so that the download becomes effective
The Basic Operator Panel 2 can also be used to make a variety of other adjustments to your application.
Please note that an overview of the parameter numbers can be found in the Operating Instructions:
Control Units CU230P-2.
Operator Panels BOP-2 and IOP-2:
38
OK
OK
Quick commissioning
OK
OK
The BOP-2 can be mounted or
removed at any time, even dur-
ing operation. The device is not
necessary for ongoing operation.
NOTE