Machine and setting data
5.6 Editing machine data and drive parameters
5.6.2
Editing BICO values
You can use the BICO editor to enter BICO values for drive parameters.
Proceed as follows
...
Note
The BICO editor also opens if you enter a value other than 0 or 1 for the value to be
changed.
46
1.
Select the "Startup" operating area.
2.
Press the "Mach.data" softkey.
3.
Select the area (e.g., Control Unit MD) where you want to edit the
parameter.
4.
Position the cursor on the entry to be edited.
5.
Press the "SELECT" or "INSERT" key.
The "BICO editor" window opens.
...
6.
Complete the "Drive object number", "Parameter number", "Bit/Index"
and "Parameter value (hex)" fields.
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
HMI sl (IM9)