Siemens SINUMERIK Series Operating Manual page 512

Programming technological functions (cycles)
10.3 Contour milling
3. Clear spigot 1
4. Contour blank 2
5. Contour spigot 2
6. Clear spigot 2
7. Contour blank 1
8. Contour spigot 1
9. Clear residual material spigot 1
10.Contour blank 2
11.Contour spigot 2
12.Clear residual material spigot 2
Procedure
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
Milling direction
● Synchronous
operation
● Up-cut
operation
RP Retraction plane
SC Safety clearance
F Feedrate
512
Software option
For removing residual material, you require the option "residual material detec‐
tion and machining".
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Contour milling" and "Spigot Res. Mat." softkeys.
The "Spigot Res. Mat." input window opens.
3. For the ShopMill program, press the "All parameters" softkey if you want
to enter additional parameters.
mm
mm
mm/min
Parameters, ShopMill program
T Tool name
F Feedrate
S / V Spindle speed or constant cutting
rate
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
mm/min
mm/tooth
rpm
m/min
Milling