Displaying And Editing Settable Zero Offset; Displaying And Editing Details Of The Zero Offsets - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Displaying and editing settable zero offset

All settable offsets, divided into coarse and fine offsets, are displayed in the "Work offset -

G54...G599" window.

Rotation, scaling and mirroring are displayed.

Activate settable zero offsets

The settable zero offsets must first be selected in the program before they have an impact.

For each zero offset, you can display and edit all data for all axes. You can also delete zero

For every axis, values for the following data will be displayed:

● Coarse and fine offsets

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Select the "Parameter" operating area.

Press the "Work offset" softkey.

Press the "G54 ... G599" softkey.

The "Work offset - G54 ... G599 [mm]" window opens.

The labeling of the softkeys for the settable work offsets varies, i.e. the

settable work offsets configured on the machine are displayed (examples:

G54 ... G57, G54 ... G505, G54 ... G599).

Please observe the information provided by the machine manufacturer.

You can edit the values directly in the table.

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Setting up the machine

4.8 Zero offsets