Installing A T/H Sensor (In The Scenario With 800 Mm Wide Network Cabinet) - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)

2.2.7.15.2 Installing a T/H Sensor (in the Scenario with 800 mm Wide Network Cabinet)

Context
From the cabinet front, install the T/H sensor with its network port facing upwards.
Figure 2-63 Installation position of the T/H sensor
(1) T/H sensor
Procedure
Step 1 Install a T/H sensor.
1.
2.
Issue 07 (2019-12-20)
Open the front door of the network cabinet.
Install the T/H sensor base on the left of the network cabinet, push the T/H sensor into
the cabinet, and clamp the T/H sensor onto the base.
Copyright © Huawei Technologies Co., Ltd.
2 Installation
(2) Base
70