Pc/Hdmi Audio; Setting The Sleep Timer - Toshiba 26HLC56 Owner's Manual

Toshiba lcd tv monitor owner's manual
Hide thumbs Also See for 26HLC56:
Table of Contents

Advertisement

PC/HDMI Audio

The PC and HDMI inputs share the same set of analog audio
inputs. If you have both a PC and an HDMI/DVI device
connected to the monitor (and the HDMI/DVI device requires
analog audio output), use the PC/HDMI Audio setting to
specify which audio (PC or HDMI/DVI) will be output from
the monitor's speakers (- pages 14-15).
To set the PC/HDMI Audio:
1
Press Y and open the Set Up menu.
2
Highlight AV Connection and press T.
3
Press B or b to select PC/HDMI Audio, and then press
C or c to select PC or HDMI.
AV Connection
PC/HDMI Audio
HDMI Audio
MENU
Back
EXIT
PC: Mutes the sound from the HDMI device, and outputs
the sound of the PC.
HDMI: Mutes the sound from your PC, and outputs the
sound of the HDMI device.
Note:
• The PC/HDMI Audio setting influences the HDMI
Audio setting. If the PC/HDMI Audio setting is set to
HDMI, the HDMI Audio setting changes to Auto. If the
PC/HDMI Audio setting is set to PC, the HDMI Audio
setting changes to Digital and will be grayed out.
• The PC IN and HDMI IN terminals share the audio
inputs labeled PC/HDMI (AUDIO) on the monitor's back
panel.
38
Chapter 6: Using the Monitor's features
PC
Digital
Watch TV

Setting the sleep timer

You can set the sleep timer to turn off the monitor after a set
length of time (maximum of 12h50m).
To set the sleep timer:
Press [ on the remote control to set the length of time until
the monitor turns off. Repeatedly press [ to increase the
time in 10-minute increments, up to 12h50m (12 hours and 50
minutes).
To cancel the sleep timer:
Press [ until it is set to 00h00m.
To set the sleep timer using the on-screen menus:
1
Press Y and open the Timer menu.
2
Press B or b to highlight Sleep Timer.
Sleep Timer
On Timer
MENU
Back
EXIT
3
Press the Number buttons (0–9) or C or c to enter the
length of time until the monitor turns off automatically.
4
Press O to start the timer.
Note:
• When a power failure occurs, the sleep timer setting may be
cleared.
• To display the amount of time remaining on the sleep timer,
press E.
Timer
00h00m
Timer
02:00
00:00
Watch TV

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

32hlc5637hlc56Hlc56Vx1a00011000

Table of Contents