Recording Unit Cleaning Procedure - Toshiba DP125F Operator's Manual

When the Recorded Image is not Clear... - continued

Recording Unit Cleaning Procedure

1 2
Open the Top Cover
Top Cover
Release Lever
037
Grasp the Top Cover Release
Remove the Developer Assem-
Lever to open the Top Cover.
bly (with the Drum Unit at-
tached).
NOTE:
If a problem with the Record-
ing Unit remains after this IMPORTANT:
action, you may require a
new developer assembly or
drum unit.
Check for dirt or paper un-
der the developer assembly
(with drum unit) first. Call
your service representative
for assistance.
Remove the
3
Wipe the Glass
Developer Assembly
Surface of Laser Unit
(with Drum Unit)
Developer
Glass
Assembly
051
Wipe the glass surface of the
laser unit with a soft dry cloth
(lens cleaner cloth).
• Never touch the photo-
conductive drum (the
green surface) of the
Drum Unit. If the surface
is scarred or scratched,
it will cause print quality
problems.
• Do not expose the pho-
toconductive drum of
the Drum Unit to light for
more than 3 minutes. If
the Drum Unit is to be
left anywhere outside
the facsimile, be certain
to cover it with cloth, pa-
per, etc.
Clean the Transfer
4
Wire and Discharge
Wire
103-1
104
Clean the Transfer Wire and
Discharge Wire with a cotton
swab.
CAUTION:
Do not touch the Transfer
Wire and Discharge Wire
with your hands. The oils
from your hands could con-
taminate the wire resulting
in lower print quality.
5
Clean the Paper
Guide
105
Wipe the Paper Guide with a
dry cloth.
237