Secure RX Manual Activation
This section describes the pro-
1
cedure to manually activate Se-
cure RX.
Turn the Flip Panel to the "50-
NOTES:
73" view to select the desired
In order to manually activate
Function Key.
Secure RX, you must first
activate Secure RX by going
Press:
through the Secure RX Ac-
cess Code setting. (See
page 176).
NOTE:
2
Display the SECURE
Select START or
RX Menu
STOP
To manually activate Secure
RX, press:
The following screen is dis-
played for 2 seconds to confirm
your selection. Then the display
If Secure RX Activation is set
returns to the Standby Mode.
to OFF in the "Secure RX
Activation Period Setting", an
error will result upon press-
OPERATION COMPLETED
ing
in the operation
above. The message "NOT
ALLOWED NOW" will be dis-
played for 2 seconds, then
the screen returns to the
Standby Mode.
SECURE RX
1.START
2.PRINT
179