Appendix; Overview Of The Standards Relevant For Network Installation; A.1 Overview Of The Standards Relevant For Network Installation - Siemens SIMATIC NET System Manual

Appendix

A.1

Overview of the standards relevant for network installation

Introduction
The section provides you with a general overview of the standards that you need to consider
during the installation of networks in buildings in general and of Industrial Ethernet in
particular.
Note
This section can only contain general information that is valid at the time of printing.
For detailed guidelines that are always up-to-date please refer to the PROFIBUS User
Organization e.V.
The PROFIBUS Users Organization
PROFIBUS Users Organization e.V.
Haid-und-Neu-Str. 7
D-76131 Karlsruhe, Germany
Phone +49 (0) 7 21 / 96 58 590, Fax +49 (0) 7 21 / 96 58 589
germany@profibus.com, www.profibus.com
Standards for application-neutral communication cable networks in the office environment
Standard
ISO/IEC 11801
EN 50173
Through the use of Ethernet, also in the automation technology, the existing standards
needed to be extended by the industrial area.
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
Area of application
International standards for network planning, in office buildings
European standard for network planning in office buildings; applied as a national
standard
A
361