Specifications; Standard Accessories - Hitachi DS14DBL Handling Instructions Manual

English
10. Do not use in a location where strong static electricity
generates.
11. If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears abnormal
during use, recharging or storage, immediately remove it
from the equipment or battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your eyes, do not
rub your eyes and wash them well with fresh clean water
such as tap water and contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well with
clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.

SPECIFICATIONS

POWER TOOL
Model
High mode
Medium mode
Low
Low 2 mode
Low 1 mode
No-load
speed
High mode
Medium mode
High
Low 2 mode
Low 1 mode
Wood
(Thickness 18 mm)
Drilling
Metal
(Thickness 1.6 mm)
Capacity
Machine screw
Driving
Wood screw
Rechargeable battery
Weight
CHARGER
Model
Charging voltage
Weight
8
3. If you fi nd rust, foul odor, overheating, discolor,
WARNING
If a conductive foreign matter enters in the terminal of lithium
ion battery, the battery may be shorted, causing fi re. When
storing the lithium ion battery, obey surely the rules of
following contents.
○ Do not place conductive debris, nail and wires such
○ To prevent shorting from occurring, load the battery
DS14DBL
0 – 350 /min
0 – 300 /min
0 – 250 /min
0 – 180 /min
0 – 1600 /min
0 – 1300 /min
0 – 1100 /min
0 – 850 /min
50 mm
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
BSL1430: Li-ion 14.4 V
(3.0 Ah 8 cells)
1.9 kg

STANDARD ACCESSORIES

UC18YRSL
14.4 – 18 V
0.6 kg
DS18DBL
DS14DBL
Standard accessories are subject to change without notice.
deformation, and/or other irregularities when using the
battery for the fi rst time, do not use and return it to your
supplier or vendor.
as iron wire and copper wire in the storage case.
in the tool or insert securely the battery cover for
storing until the ventilator is not seen (See Fig. 1).
Steel: 13 mm,
Aluminum: 13 mm
6 mm
8 mm (diameter) × 100 mm (length)
(Requires a pilot hole)
BSL1830: Li-ion 18 V
1 Plus driver bit (No. 2) ..............................1
2 Charger (UC18YRSL) .............................1
3 Battery (BSL1830) ..................................2
4 Plastic case .............................................1
5 Battery cover ...........................................1
6 Side handle .............................................1
1 Plus driver bit (No. 2) ..............................1
2 Charger (UC18YRSL) .............................1
3 Battery (BSL1430) ..................................2
4 Plastic case .............................................1
5 Battery cover ...........................................1
6 Side handle .............................................1
DS18DBL
0 – 350 /min
0 – 300 /min
0 – 250 /min
0 – 180 /min
0 – 1700 /min
0 – 1400 /min
0 – 1200 /min
0 – 900 /min
65 mm
(3.0 Ah 10 cells)
2.0 kg