Start-Up; First-Time Operation - Bosch Rexroth LU 2 Assembly Instructions Manual

9 Start-up

9.1 First-time operation

Unforeseen movements, falling workpiece carrier
Risk of injury caused by unforeseen movements and falling objects.
Make sure that the product has been installed correctly by qualifi ed personnel
(see page 8) before starting it up.
Malfunctions due to incorrect assembly and start-up
The product may be damaged or its service life shortened.
Start-up requires basic mechanical and electrical knowledge.
The product may only be operated by qualifi ed personnel (see page 8).
Operational malfunctions caused by unequal distribution of the lubricant
The product can be damaged; the service life may be adversely affected.
Only use 2 equal lubricant pins (do not mix adapter sets).
Different lubricating pins cause unequal distribution through an uneven
fl ow resistance.
The difference in length of the lubrication lines should be < 20 mm.
Different lubricating line lengths cause unequal distribution through an
uneven fl ow resistance.
Operational malfunctions due to lack of lubricants
The product can be damaged; the service life may be adversely affected.
Ensure the lubrication lines are completely fi lled with lubricant before
the product is put into operation.
• Before fi rst use or re-commissioning of a conveyor system, run a risk assessment
in accordance with DIN EN ISO 12100.
CAUTION
NOTICE
3 842 358 814/2017-01, MIT: LU 2, Bosch Rexroth AG
Start-up 41/54