Samsung OfficeServ 7400 Technical Manual page 57

OfficeServ 7400
TECHNICAL MANUAL
FRONT VIEW OF GPLIM MODULE
Ports & LEDs
P1~P12
P13, P14
Left LEDs of P1~P6
Right LEDs of P1~P6
LINK
ACT
RST
Figure 3.42 Front View of the GPLIM
Table 3.18 Ports and LEDs of GPLIM
Function Description
Ports for connecting to 10/100 Base-T Ethernet.
Ports for connecting to 1000 Base-SX/LX/TX Gigabit Ethernet (GbE). Requires
SFP connector.
First LED: Link operation of P1~P6
- On: LED turns green when a link is in operation
- Blink: Each port blinks on active status
Second LED: 10/100 Base-T operation of P1~P6
- Off: Operated in 10 Base-T
- On: Operated in 100 Base-TX
First LED: Link operation of P7~P12
- On: LED turns green when a link is in operation
- Blink: Each port blinks on active status
Second LED: 10/100 Base-T operation of P7~P12
- Off: Operated in 10 Base-T
- On: Operated in 100 Base-TX
LED turns on when P13~P14, which are Giga ports, is connected
LED blinks when P13~P14, which are Giga ports, is on active status
Button for resetting GPLIM
3.41
Home Page Home Page Table of Contents Table of Contents
INSTALLATION
PART 3 MAY 2010