Software And Database Management; Software Management; Database Management - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
PART 9. SOFTWARE AND DATABASE
MANAGEMENT

9.1 SOFTWARE MANAGEMENT

The OfficeServ 7400 operating software is stored on the media card, which is inserted into the
front of the MP40 card. The SD/Smart Media/MMC+ card has 1GB/32MB/64MB of NAND flash
memory and is formatted, with a custom format to allow faster loading, in a similar manner to
a hard disk. In addition to the operating system the media card can carry operating software
for the LP40 card and the TEPRI/TEPRIa/TEPRI2 card. The media card also has the capability to
store a backup copy of the system database in addition the operating software files.
Software can be downloaded from the media card to the cards listed above using MMC 818
and will be stored in those cards on-board flash memory. The cards will automatically reboot,
load and run the new software when the download process is complete. Files can be deleted
using MMC 819, File Control. This is necessary to clean up the media card.

9.2 DATABASE MANAGEMENT

The customer database can be saved to the media card using MMC 815 where it is stored as a
single file. This save can be performed manually or the system can be programmed to save
the database automatically at a designated time every day. Using WebMMC/OIT the database
can be downloaded from the system and stored on the PC or it can be uploaded from the PC
to the system. The database uploaded from WebMMC/OIT is not stored in the media card but
is loaded directly into active memory.
Home Page Home Page
9.1
Table of Contents Table of Contents
INSTALLATION
PART 9 MAY 2010