Advertisement
1-4. Attaching PR-242/AT-126 board to Camera
4.
n
When the 16:9/4:3 switchable OHB is used, the BKP-5091 (PR-243 board) is used instead of the
CN-1672 board.
Perform installation after performing "Section 1-6. Modifying DA-88 board". (Regarding insatllation,
refer to Section 2-6.)
BVP-550/550P:
(1) Peel off the sheet A from the radiation sheet and place it on the back of the heat sink as shown in the
figure.
Then, peel off the sheet B.
(2) Attach the heat sink and the CN-1672 board (supplied with the unit) to the PR-242 board.
. . . . . BVP-550/550P
Radiation sheet
1-4 (E)
Sheet B
Sheet A
Heat sink
PR-242 board
CN-1672 board
Heat sink
B3 x 5
B3 x 4
B3 x 5
BKP-5090
Advertisement
