Advertisement
1-4. Attaching PR-242/AT-126 board to Camera
If attaching the PR-242 board to the BVP-500/500P, a long-blade screwdriver (200 mm long or more) is
required.
Sony Part No.:
7-700-739-01 (or equivalent)
1. Open the both side panels.
2. Pull out the AT-95 board and insert the AT-126 board instead.
. . . . . BVP-550/550P
3. Remove the four screws and disconnect the flexible card wire to remove the PR-211 board. Attach
the PR-242 board instead.
n
When disconnecting the flexible card wire, refer to Section 1-8 "Disconnecting/Connecting Flexble
Card Wire".
. . . . . BVP-550/550P
PR board
B3 x 5
B3 x 5
B3 x 5
B3 x 5
BKP-5090
AT board
Flexible card wire
1-4. Attaching PR-242/AT-126 board to Camera
. . . . . BVP-500/500P
AT board
. . . . . BVP-500/500P
PR board
B3 x 4
Flexible card wire
1-3 (E)
Advertisement
