Table of Contents
Advertisement
WHEN TROUBLE ARISES
Steps to take in an emergency
EMERGENCY START (SMART ENTRY AND START SYSTEM)
When the engine does not start, the following procedure can be used to start the engine if
the vehicle's starting system and ENGINE START STOP switch function normally.
1. Set the parking brake and put the transmission in P position.
2. Press the ENGINE START STOP switch to ACCESSORY mode by pressing it once
(while the brake pedal is not depressed).
3. Press and hold the ENGINE START STOP switch for about 15 seconds while
depressing the brake pedal firmly.
Even if the engine can be started using the above procedure, the system may be
malfunctioning. Have the vehicle checked by your Toyota dealer.
If the engine cannot be started using the above procedure, contact your Toyota dealer.
IF THE SHIFT LEVER CANNOT BE MOVED FROM P POSITION
If you cannot move the shift lever from P
position to other positions, even though the
brake pedal is depressed, use the shift lock
override button as follows:
1. Vehicles with standard type ignition
switch–
Turn the ignition switch to the LOCK
position. Make sure the parking brake
is on.
Vehicles with smart entry and start
system–
Press the ENGINE START STOP
switch off. Make sure the parking
brake is on.
2. Press and hold the shift lock override button and move the shift lever. You can only
shift out of P position while pressing the button.
3. Shift into N position.
4. Start the engine. For your safety, keep the brake pedal depressed.
Have the system checked by your Toyota dealer as soon as possible.
IF YOU LOSE YOUR KEYS
You can purchase a genuine new key at your Toyota dealer.
Vehicles with standard type ignition switch–
Bring a master key and provide the key number that is stamped on the key number plate.
Vehicles with smart entry and start system–
Bring the remaining key(s) and provide the key number that is stamped on the key number
plate.
314
Advertisement
Table of Contents
