CC-Link IE Field Network Basic configuration
This section shows the CC-Link IE Field Network Basic configuration using this product.
CC-Link IE Field Network Basic comprises the Ethernet port (CH1) and an Ethernet cable.
Use modules and partner products supported by CC-Link IE Field Network Basic when configuring the
network.
Network topology
Connect in a star configuration using switching hubs and general-purpose Ethernet cables.
(2)
(3)
(1) Master station
(2) Switching hub
(3) Slave station
access range
The access range of the CC-Link IE Field Network Basic is within the same network address of the Ethernet . Ranges outside
the router cannot be accessed.
Ex.
If subnet mask 255.255.255.0 and network address 192.168.3.
(1)
192.168.3.39
(2)
(4)
192.168.3.1
192.168.3.1
(1) Master station
(2) Switching hub
(3) Router
(4) Slave station
Have the subnet mask as the same value, and ensure there is no duplication in IP addresses.
6 WIRING AND CONNECTION OF SYSTEM COMPONENTS
64
6.3 Network Configurations
(1)
(3)
192.168.4.2
192.168.3.1