(5)
(6)
5.
Insert the battery connector (6) into the connector (5).
Align this so that the black cable is above the battery
connector, and ensure that it is fully inserted.
6.
Close the CFast/BATTERY cover until it clicks.
7.
Power ON the product.
8.
Make sure that the BATTERY LED is off.
If the BATTERY LED is on, the battery may have been
installed incorrectly. Install the battery again. If the BATTERY
LED still is not off, a battery error is likely. Replace with
another battery.
Appendix 12 Battery Replacement
A
APPX
173