Locations and Functions of Parts and Controls
JTC-P200 ICU (Image Control Unit)
Front panel
12
1 POWER switch
Turns the ICU on/off.
2 Power lamp
Lights when the ICU is turned on.
3 Connector panel
The CONTROL 4 connector is inside. When using the
connector, open the connector panel by loosening the
screw.
4 CONTROL 4 connector (D-sub 15-pin)
This is an RS-422 input port. Connect it to peripheral
equipment such as the JTC-C200 ICU controller for
maintenance.
5 Front cover
To remove the panel, loosen the four screws.
3
4
5
To remove/attach the front panel
When removing, loosen the four screws.
Locations and Functions of Parts and Controls
When attaching, insert
the projecting part on the
front panel into the slot
on the ICU.
9
Table of Contents