Parameterization
The "Measurement function" parameterizing screen form is selected via the following icon in
the toolbar of the STARTER commissioning tool.
Figure 3-8
3.2.4
Measuring sockets
Description
The measuring sockets are used to output analog signals. Any interconnectable signal can
be output to any measuring socket on the Control Unit.
CAUTION
The measuring sockets should be used for commissioning and servicing purposes only.
The measurements may only be carried out by properly trained specialist personnel.
Figure 3-9
Commissioning Manual
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
STARTER icon for "Measuring function"
CU310-2 DP/PN measuring sockets, CU320-2 DP/PN measuring sockets
View from front View from below
Diagnostics
3.2 Diagnostics via STARTER
213