Installing cards in the 7360 ISAM FX-8 shelf
Figure 165
4
5
6
7
8
9
300
Remove fixation screws for NGFC-H card
Remove the NGFC-H card from the shelf and wear the antistatic wrist strap. Place the card
in an ESD protective bag.
Remove the new NGFC-H card from its ESD protective bag. Wear the antistatic wrist strap.
Slide the new NGFC-H card in its slot.
Secure the NGFC-H card in place with the fixation screws. Maximum torque: 1 N.m ±10%.
Reconnect the power cable connectors and safety cover.
STOP. This procedure is complete.
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
DRAFT
22386
Issue: 09