Application-Specific Use Limits; Sensor Technical Data - Siemens SITRANS DA400 Operating Instructions Manual

Process monitoring sitrans da400 for oscillating positive displacement pumps with protection against explosion
Table of Contents

Advertisement

Communication
Layer 1+2 according to PROFIBUS PA, transmission technique according to IEC 1158-2
PC configuration software
9.2

Application-specific use limits

Usage limits for water
Delivery side
Number of strokes
9.3

Sensor technical data

Rated conditions
Permissible operating temperature
Degree of protection according to EN 60529
Mechanical load
Climate class
Construction
Housing material
Cable
Weight
Dimensions (W x H x D) in mm (inches)
SITRANS DA400 for oscillating positive displacement pumps with protection against explosion
Operating Instructions, 10/2007, A5E00841127-01
C2 connections
Device profile
Device address
Minimum number of strokes
Maximum number of strokes
Piezoceramic sensor with pre-amplifier
Encapsulated electronics
4-wire cable with anti-kink sleeve
9.2 Application-specific use limits
Four connections are supported on master class
2.
PROFIBUS PA profile V3.0 Rev. 1, Class B
1 ... 126; 126 (delivery state)
SIMATIC PDM (not supplied with the device)
≥ 10 bar a
4 min
-1
10 ... 500 min
-1
-40 °C ... 110 °C ( -40 °F ... 230 °F)
IP66/IP68
Class 4M7 to DIN EN 60721-3-4
Class 4K4 to DIN EN 60721-3-4
Stainless steel 1.4571 (316Ti SST)
Ends with connector sleeves and cable lug
for connection to SITRANS DA400
125 g (0.276 lb)
26 x 29 x 40 (1.02 x 1.14 x 1.57)
Technical Data
75

Advertisement

Table of Contents
loading

Table of Contents