Table of Contents
Advertisement
2
Technology > Various Modes of Control > Outline of operations > Sequence of surface insert operation
Various Modes of Control
Outline of operations
When a paper feed signal is received from the host machine after paper is loaded in the tray,
the following three sequences of operations are performed:
1.Sequence of surface insert operation
2.Sequence of ack insert operation
3.Sequence of inserter pickup tray switch operation
■
Sequence of surface insert operation
The following operations are performed when two papers are fed from the inserter paper feed unit.
(1) First paper feeding for separation
- The upper tray lift motor turns in the reverse direction at a speed of 533 pps to move the paper feed
tray upward.
- The upper tray pick sensor turns on to stop the upper tray lift motor.
- For plain paper, the tray paper feed motor turns in the reverse direction at a speed of 500 mm/s
to start separating the paper in the tray. For thick paper, the tray paper feed motor turns in the
reverse direction at a speed of 250 mm/s to start separating the paper in the tray.
- For the upper tray, the tray paper feed motor stops when the paper has been fed 14.7 [mm] since
the registration sensor turned on. For the lower tray, the tray paper feed motor stops when the
paper has een fed 19.1 mm since the registration sensor turned on.
- The upper tray lift motor turns in the normal direction at a speed of 533 pps to move the paper feed
tray 9 pls downward.
2
Technology > Various Modes of Control > Outline of operations > Sequence of surface insert operation
M2
S2
F-2-8
F-2-8
M1
S3
F-2-9
F-2-9
M2
F-2-10
F-2-10
2-6
2-6
Advertisement
Table of Contents
