Table of Contents
Advertisement
DISPlay Subsystem
INSert
To insert a waveform from the oscilloscope to the oscilloscope display:
Command
:DISPlay:INSert [<module number>,]<label>
slot in which oscilloscope master card is installed
<module
number>
string of 1 alpha and 1 numeric character enclosed by single quotes
<label>
Example
OUTPUT XXX;":DISPLAY:INSERT 'C1'"
To insert a waveform from a logic analyzer or high speed timing module to
the oscilloscope display:
Command
:DISPlay:INSert <slot no>,<label>,<bit-id>
card slot number of the module from which waveform is to be taken
<slot no>
string of up to 6 alphanumeric characters enclosed by single quotes
<label>
integer from 0 to 31
<bit-id>
Example
:OUTPUT XXX;":DISPLAY:INSERT 4,'WAVE',10"
For a complete explanation of the label name and the <bit-id>, refer to the
Programmer's Guide of the logic analyzer or timing analyzer being used.
5–6
Advertisement
Table of Contents
