Siemens SINUMERIK 802D sl Programming Manual page 102

Enhanced Level Commands
4.1 Program support functions (1)
Example
M3 S300;
G90 G0 Z100
G90 G99 G76 X200. Y--150. Z--100. R50. Q10. P1000 F120.;
Y--500.;
Y--700.;
X950.;
Y--500.;
G98 Y--700.;
G80;
G28 G91 X0 Y0 Z0; Return to the reference position return
M5;
4-102
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
Rotate spindle
Position, bore hole 1, then return to point R,
Stop at the bottom of the hole for 1 s.
Position, drill hole 2, and return to point R.
Position, drill hole 3, and return to point R.
Position, drill hole 4, and return to point R.
Position, drill hole 5, and return to point R.
Position, drill hole 6, and return to the initial level.
Cancel canned cycle
Spindle stop
© Siemens AG 2007 All rights reserved
04.07