Intended Audience
This document is intended for the personnel who are involved in planning,
managing, and performing the tasks to prepare your site for Compute Rack
installation and to install the same.
This document assumes the following:
•
The reader has a background in hardware installation of computer systems.
•
The reader is familiar with the location where the Compute Rack will be installed,
including knowledge of physical characteristics, power systems and specifications,
and environmental specifications.
Product Version
This document revision applies to Compute Rack 220H version 0021R22500.
Release Notes
Read the release notes before installing and using this product. They may
contain requirements or restrictions that are not fully described in this document
or updates or corrections to this document.
Document Organization
The table below provides an overview of the contents and organization of this
document. Click the chapter title in the left column to go to that chapter. The first
page of each chapter provides links to the sections in that chapter.
Chapter
Chapter 1,
Chapter 2,
Chapter 3,
Chapter 4,
Chapter 5,
maintenance
vi
Introduction
Describes user replacement overview for the Hitachi Compute Rack
System.
Replaceable parts
Describes the user replaceable parts of the CR 220H.
Preparation
Describes a preparation of replacing components of the system unit.
Replacing parts
Describes how to remove and install a component of the system unit.
Setup after
Describes setup required after maintenance conducted due to a
component failure of the system unit.
Hitachi Compute Rack 220H CRU Replacement Guide
Description
Preface