Setting Speaker Level - Samsung HT-AS710 Instruction Manual

Setting speaker level

You can set the balance and level of speakers.
REMOTE CONTROL
1
2
3
4
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Using the SPK LEVEL button
1 Press SPK LEVEL button to select the speaker you want.
Each time you press this button, F.L
•
S.W
2 Press ...† button to set the speaker level you want.
You can adjust it from -10 to +10dB by 1 step.
•
The sound gets quieter at -10dB and louder at +10dB.
•
36
√
Press SETUP/MENU button, and then press ENTER
button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
Press button to select the "LEVEL SETUP", and then
press ENTER button.
Press button to select the speaker you want.
Each time you press button, F.L CEN F.R S.R
•
S.W will be selected in turn.
...†
Press button to set the speaker mode.
• You can adjust it from -10 to +10dB by 1 step.
The sound gets smaller at -10dB and louder at +10dB.
•
CEN F.R S.R
SPK LVL OFF will be selected in turn.
S.B S.L
S.B S.L
Setting Speaker Level
F.L (front left) : -10 ~ +10dB
•
CEN (centre) : -10 ~ +10dB
•
F.R (front right) : -10 ~ +10dB
•
S.R (surround right) : -10 ~ +10dB
•
S.B (surround back) : -10 ~ +10dB
•
• S.L (surround left) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
MAIN UNIT
1
Press SETUP button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
2
Press FUNCTION button to select the "LEVEL SETUP".
Press SURROUND button.
3
Each time you press this button, F.L CEN F.R
•
S.W will be selected in turn.
Press SELECT( ) button to set the speaker level you
4
,
want.
You can adjust it from -10 to +10dB by 1 step.
•
The sound gets smaller at -10dB and louder at +10dB.
•
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
"SETUP OFF" appears on the display and exits Setup Menu.
GB
S.R S.B S.L
37