Setting Digital Input - Samsung HT-AS710 Instruction Manual

Setting digital input

You can set the digital input for a DVD/SAT/CD player to either OPTICAL or COAXIAL.
REMOTE CONTROL
1
2
3
4
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
•
"SETUP OFF" appears on the display and Setup Mode is exited.
24
√
Press SETUP/MENU button, and then press ENTER
button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
Press button to select the "DIGITAL IN", and then
press ENTER button.
Press button to select the the CD, DVD or SAT
function.
Each time you press this button, CD DVD SAT will be selected in turn.
•
Press ...† button to set the digital input.
Each time you press this button, COAXIAL OPTICAL2
will be selected in turn.
•
OPTICAL1
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
2
Press FUNCTION button to select the "DIGITAL IN".
3
Press SURROUND button to select the CD, DVD or SAT
function.
Each time you press this button, CD DVD SAT will be selected in turn.
•
4
Press SELECT( ) button to set the digital input.
,
Each time you press this button, COAXIAL OPTICAL2
•
will be selected in turn.
To exit setup mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP OFF" appears on the display and the unit Setup Mode is exited.
You can select only one digital input for each function.
•
Example) If you have selected COAXIAL for the CD function,
you cannot select COAXIAL for the DVD or SAT function.
Function Digital input
DVD OPTICAL1
SAT OPTICAL2
CD COAXIAL
GB
OPTICAL1
25