Siemens SINAMICS S120 Getting Started page 24

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Configuring your drive project

4. Select the entry "Servo" from the dropdown list "Default setting for all components".

5. Click on button "Create".

6. To continue configuration, click on button "Go OFFLINE".

7. In order to select the line filter, double-click on option "Infeeds > Infeed_1 > Configuration"

The Control Unit searches for connected drive units over the DRIVE-CLiQ interface and

finds a drive in the sample project.

The drive in the sample project will now be controlled as a servo drive.

The automatic configuration process commences. When the process is complete, the

window "Automatic configuration completed" is displayed.

in the project navigator.

Getting Started, 11/2009, 6SL3097-4AG00-0BP0

Getting Started

Table of Contents