SINAMICS S120 drive system
1.1
Overview
This manual provides instructions on how to commission a simple SINAMICS S120 drive
train based on a sample project. By way of introduction, this chapter of the manual gives you
a brief overview of the SINAMICS S120 drive system.
It describes the following steps required to create a sample project:
Step
1
2
3
4
5
1.2
SINAMICS S120 system overview
The SINAMICS S120 drive system consists of a variety of different modules. It is constructed
of infeeds, filters, motor power units, modules for additional functions, Control Units plus
standard and special versions of rotating and linear motors.
Getting Started
Getting Started, 11/2009, 6SL3097-4AG00-0BP0
Action
Definition of requirements
Establishment of communication between the PG/PC and Control Unit
Creation of the sample project with the help of a Wizard
Automatic configuration of the sample project
Operation of the PG/PC control panel for driving the motor
1
11