4-6 Selecting Marking Mode
The marking mode is set on the operation screen for the following cases; test marking mode, starting and stopping guide
laser and dual pointer using.
1
Description
1
MARKING MODE:
Selects mode from either RUN or TEST.
In Operation screen, only RUN mode is available.
2
START:
Starts marking in the selected mode at "1".
3
STOP:
Stops marking.
4
INDICATE:
Displays the operating status of dual pointer and guide laser.
In Operation screen, Guide indication is not available.
2
3
ME-LP400V-OP-6
4
135