Cleaning Moist Dust Filter - ABB IRC5 Product Manual

3.4.2 Cleaning moist dust filter

Location
The moist dust filters are located as shown in the illustration below.
xx1300000852
A
Required equipment
Equipment
Cleaning agent
Compressed air
Cleaning
The procedure below details how to clean the moist dust filter.
1
2
3
Product manual - IRC5
3HAC047136-001 Revision: M
Moist dust filter magazine
Action
Remove the moist dust filter.
Clean the filter three or four times.
Allow the filter to dry in one of these ways:
• Lying flat on a flat surface
• Blow with compressed air in opposite
direction of filter airflow.
© Copyright 2004-2018 ABB. All rights reserved.
3.4.2 Cleaning moist dust filter
Note
Water 30-40°C with cleansing liquid or detergent.
Note/Illustration
How to remove the moist dust filter is
detailed in section
dust filter on page
Note
Do not wring the filter out!
Continues on next page
3 Maintenance
Replacement of moist
187.
191